Advance Search

column
Study on the effect of different extraction conditions on "three zones" of coal spontaneous combustion in goaf
WEN Hu, WANG Wen, CHENG Xiaojiao, JIA Yongfeng, CHENG Bangkai, CHENG Ming, HU Wei
2020, 47(6): 1-7. DOI: 10.19835/j.issn.1008-4495.2020.06.001
Abstract PDF
Experimental research on the proportion and mechanical properties of outburst briquette
DAI Linchao
2020, 47(6): 8-12. DOI: 10.19835/j.issn.1008-4495.2020.06.002
Abstract PDF
Research on key technology of coal roadway support in advance abutment pressure zone
YANG Yawei, ZHAI Yingda
2020, 47(6): 13-18. DOI: 10.19835/j.issn.1008-4495.2020.06.003
Abstract PDF
Study on stability control of surrounding rock of roadway affected by driving disturbance
ZHANG Bin, SU Xuegui, DUAN Zhenxiong, CHANG Lizong, WANG Fuzhou
2020, 47(6): 19-24,31. DOI: 10.19835/j.issn.1008-4495.2020.06.004
Abstract PDF
Study on spontaneous combustion oxidation of carbonized powder
XIAO Yang, PANG Pan, HUANG Chuanliang, LU Xiaodong, YIN Lan
2020, 47(6): 25-31. DOI: 10.19835/j.issn.1008-4495.2020.06.005
Abstract PDF
Study on properties of composite filling material of fluorogypsum modified high water fly ash
BAI Longjian, YAN Guochao, YANG Tao
2020, 47(6): 32-36. DOI: 10.19835/j.issn.1008-4495.2020.06.006
Abstract PDF
Study on borehole arrangement mode for eliminating the blank zone in blind area of drilling gas extraction
LI Pu, ZHANG Xiaodong, QIN Muguang
2020, 47(6): 37-42. DOI: 10.19835/j.issn.1008-4495.2020.06.007
Abstract PDF
Numerical study on the influence of strip defect angle on the mechanical properties of sandstone
LYU Xuegang, REN Mengzi, YANG Weihong, WANG Feng
2020, 47(6): 43-47,53. DOI: 10.19835/j.issn.1008-4495.2020.06.008
Abstract PDF
Analysis of the influence of coal thickness on the physical and mechanical characteristics of coal and rock mass
LI Huigui, WEI Le, LI Huamin
2020, 47(6): 48-53. DOI: 10.19835/j.issn.1008-4495.2020.06.009
Abstract PDF
Study on rheological properties of Mg(OH)2 modified fire prevention paste
ZHANG Xinhai, HU Zhen, XUE Hanling, ZHANG Guowei, LI Jingwen, SHANG Zhizhou
2020, 47(6): 54-58. DOI: 10.19835/j.issn.1008-4495.2020.06.010
Abstract PDF
Experimental study on the strength of remolded loess on filled sites under different compaction energies
FAN Yuhao, QIAN Sizhong, LI Jinhua
2020, 47(6): 59-62. DOI: 10.19835/j.issn.1008-4495.2020.06.011
Abstract PDF
Research and application on prevention and control system of hydrogen sulfide disaster of coal mining in the overlapping area of coal and oil resources
MA Xinghua, HUANG Guangli, WANG Zhen
2020, 47(6): 63-68. DOI: 10.19835/j.issn.1008-4495.2020.06.012
Abstract PDF
Research and application of gas stereoscopic drainage technology in horizontal slicing working face of steeply and ultra-thick coal seam
ZHENG Sanlong, FAN Jiuyuan, WANG Gang, WANG Enmao
2020, 47(6): 69-74. DOI: 10.19835/j.issn.1008-4495.2020.06.013
Abstract PDF
Study on the identification of spontaneous combustion hazard area in goaf based on optical fiber temperature measurement technology
CAO Wenhui, WANG Fei
2020, 47(6): 75-79,84. DOI: 10.19835/j.issn.1008-4495.2020.06.014
Abstract PDF
Design of precise 3D positioning system for mine roadway based on UWB
SHEN Guojie, ZHOU Desheng, ZHENG Xuena, LI Min
2020, 47(6): 80-84. DOI: 10.19835/j.issn.1008-4495.2020.06.015
Abstract PDF
Study on dynamic early warning method of high and steep slope in Qidashan Surface Mine
SUN Mingchen, SUN Houguang, ZHONG Xiaoyu, CAO Wang, CHEN Xiaoqing
2020, 47(6): 85-88,93. DOI: 10.19835/j.issn.1008-4495.2020.06.016
Abstract PDF
Study on deformation and failure mechanism of rock mass in deep coal seam floor based on damage degradation of available bearing capacity
ZHANG Fengda, ZHANG Yujun
2020, 47(6): 89-93. DOI: 10.19835/j.issn.1008-4495.2020.06.017
Abstract PDF
Study on critical value of K1 of outburst risk prediction index of working face
ZHANG Yuzhu
2020, 47(6): 94-97. DOI: 10.19835/j.issn.1008-4495.2020.06.018
Abstract PDF
Study on the characteristics of lateral mining stress field in full mechanized working face with large mining height in deep mine
LI Zhengjie
2020, 47(6): 98-101,112. DOI: 10.19835/j.issn.1008-4495.2020.06.019
Abstract PDF
Progress in research on drilling repair and protect technology for gas drainage in coal mine
SHEN Kai, LIU Yanbao, BA Quanbin, ZHANG Lei, XIONG Wei
2020, 47(6): 102-106. DOI: 10.19835/j.issn.1008-4495.2020.06.020
Abstract PDF
Evolution characteristics of abutment pressure in irregular working face in steeply dipping coal seam
GUO Lindong, NIU Xingang, LU Zhanjin
2020, 47(6): 107-112. DOI: 10.19835/j.issn.1008-4495.2020.06.021
Abstract PDF
Practice and thoughts on comprehensive treatment of coal mining subsidence area in Rencheng District of Jining
SUN Guang, LI Shuzhi, DONG Qinghuan, LI Xueliang
2020, 47(6): 113-117,121. DOI: 10.19835/j.issn.1008-4495.2020.06.022
Abstract PDF
Analysis and discussion on thermal energy control equipment of gas storage and oxidation process
ZHANG Tao
2020, 47(6): 118-121. DOI: 10.19835/j.issn.1008-4495.2020.06.023
Abstract PDF
Effect of transformational leadership on safety performance—the chain mediation of organizational identification and affective commitment
LI Hongmin, LI Jizu
2020, 47(6): 122-126. DOI: 10.19835/j.issn.1008-4495.2020.06.024
Abstract PDF